This instrument is used to test the static friction coefficient of most packaging materials. During the test, the sample stage rises at a certain rate (1.5°±0.5°/S). When it rises to a certain angle, the slider on the sample stage starts to slide. At this time, the instrument senses the downward movement, and the sample stage stops rising , And display the sliding angle, according to this angle, the static friction coefficient of the sample can be calculated. Model: C0045 This instrument is used to test the static friction coefficient of most packaging materials. During the test, the sample stage uses a certain speed (1.5°±0.5°/S) Raise, when raised to a certain angle, the slider on the sample stage Start to slide down, at this time the instrument senses the downward movement, the sample stage Stop rising, and display the downward angle, according to this angle can be calculated Calculate the static friction coefficient of the sample. Applications: • Production • plastic • Film • foil • Coated materials Features: • High precision motor • Tilt angle: 0 – 60° • Angle accuracy: 0.1° Guideline: • ASTMD202 • TAPPI T815 • TAPPI T548 Optional accessories: • Slider: 90mm x 100mm, 1300g • Slide block: 63.1mm x 63.1mm, 200g • Sample mold (for plastic): 130 x 140mm • Sample mold (with 1300g slider): 93 x 160mm • Sample mold (with 200g slider): 66.5 x 100mm Electrical connections: • 220/240 VAC @ 50 HZ or110 VAC @ 60 HZ • Electrical: (Can be customized according to customer requirements) Dimensions: • H: 130mm • W: 260mm • D: 210mm • Weight: 5kg