Test and Storage of Flammable, Explosive and Volatile Substance Testing and Storage of Corrosive Material Samples Testing or storage of biological samples
Performance indicators1. Sample limitation:This test equipment is prohibited:Test and Storage of Flammable, Explosive and Volatile SubstancesTesting and Storage of Corrosive Material SamplesTesting or storage of biological samplesTesting and Storage of Samples from High Electromagnetic Emission Sources2. Volume and size:Nominal Content Area (L): 80L/150L (according to customer requirements)Nominal Inner Box Size (mm): 400 *wide 400 *high 500 mm/500 *500*550Nominal Outer Box Size (mm): 1110 *770 *1500 mm3. Performance:Test environment conditions:Airflow around the equipment is smooth, no high concentration dust, no corrosive or flammable and explosive gases.Ambient temperature: 5-35 CRelative humidity: <85%RH4. Testing methodsTemperature range: - 40 /- 70 ~ + 150 (- according to customer requirements)Temperature fluctuation: +0.5 CTemperature deviation: +2.0 TemperatureTemperature change rate:It takes about 35 minutes for 4.2.4.1 to rise from + 25 to + 150 C (no load)It takes about 65 minutes for 4.2.4.2 to decrease from + 25 ~40 ~C (no load)GB/T 2423.1-2001 Test A: Low Temperature Test MethodGB/T 2423.2-2001 Test B: High Temperature Test MethodHigh Temperature Test of GJB150.3-1986GJB150.4-1986 Low Temperature TestFunctional Introduction1. Structural characteristics:Thermal insulation envelope structure:Exterior wall: high grade steel plate paintInner wall: SUS304 stainless steel plateInsulation Material: Glass FiberAir conditioning channels:Fans, heaters, evaporators (and dehumidifiers), drainage devices, humidifiers, dry-burning preventers,Standard configuration of laboratory body:Pneumatic Balance DeviceGate: Single door. Open glass observation window with heat and dew proof for distribution on door. Test window size: 200 *300 mm. The door frame is equipped with dew-proof electric heating device to prevent frost phenomenon during low temperature operation test. Lighting lamp for observation window.Control panel (on distribution control cabinet):Temperature (humidity) control screen, operation button, overtemperature protection switch, timing device, lighting switchMachinery room: Mechanical room includes: refrigeration unit, drainage device, fan, distribution control cabinet, humidification and humidity water control device.Distribution control cabinet:Radiator fan, buzzer, distribution board, leakage circuit breaker of main power supplyHeater: Heater Material: Stainless Steel 316L Fin Heat Pipe. Heater control mode: Contactless equal period pulse width modulation, SSR (solid state relay)Humidifier: Humidification method: stainless steel humidifier. Humidifier material: stainless steel armorControl mode of humidifier: Contactless equal period pulse width modulation, SSR (solid state relay)Humidifier device: water level control device, heater anti-dry burning deviceNoise: <65 DB2. Refrigeration system:Working mode: air-cooled mechanical compression single-stage refrigeration modeRefrigeration compressor: original imported French "Taikang" totally enclosed refrigeratorEvaporator: Fin heat exchanger (also used as dehumidifier)Throttle device: thermal expansion valve, capillaryEvaporative Condenser: Brazed Plate Heat ExchangerRefrigerator control mode:The control system PID automatically adjusts the operating conditions of the chiller according to the test conditions.Evaporative pressure regulating valveRecirculation Cooling Circuit of CompressorEnergy Regulating CircuitRefrigerants: R404A, R23Other:Major components adopt international high-quality brand products.Compressor cooling fan is the original standard of Taikang, France3. Electrical control system:Controller (Model): Touch Screen ControlDisplay: LCD Touch ScreenOperation mode: fixed value mode.Setting mode: Chinese menuInput: Thermal ResistanceRefrigeration system:Compressor overpressureCompressor motor overheatingCompressor motor overcurrent4. Laboratory:Adjustable over temperature protectionUltimate Over temperature of Air-conditioning ChannelFan motor overheating5. Other:Phase sequence and phase-out protection of total power supplyLeakage protectionLoad Short Circuit Protection3. Other configurations:Power cable: one accessory of four-core (three-core Cable + protective grounding wire) cable:Lead hole: Lead hole has diameter of 50mm, specifications, its position and quantity can be customized according to user's requirements under the condition that the box structure permits and does not affect the performance.4. Conditions of use (guaranteed by users of the following conditions):Venue:Flat ground, well ventilated, free of flammable, explosive, corrosive gases and dustThere is no strong electromagnetic radiation source nearby.There are drainage ground leaks near the equipment (within 2 meters from the refrigeration unit)Ground load-bearing capacity of site: not less than 500 kg/m2Keep adequate maintenance space around the equipmentEnvironmental conditions:Temperature: 5 ~35.Relative humidity: <85%RHAir pressure: 86-106 kPaPower supply: AC380V 50HZPower capacity: 3.8KwRequirements for storage environment:When the equipment is not working, the ambient temperature should be kept within +0-45 C.