The mattress compression tester is used to assess the robustness and durability of the bubble or spring in the mattress, for the quality control of the laboratory detection and production lines in these industries. Foam compression test instrument model: F0024 The foam compression tester is used to assess the robustness and durability of the bubble or spring in the mattress, which is used for laboratory detection and production lines on these industries. Universally hardness and hardness measurements are based on the physical properties called indentation force deflection, by determining the relationship between the ratio of the test piece thickness required to be compressed and the circular turret force used. When the tester is applied to the sample, the circular plenometer is simultaneously accepted from the sensor and records the degree of indentation. In order to compare the test results, the test piece must be the same size and thickness. Software: Foam compression tester provides multi-function supporting software that can be used in real time control and continuous data acquisition, and can be programmed in accordance with the requirements. The software can help the tester's test parameter analysis and display various types of information data when testing. This software is compatible with most computer operating systems (Windows XP, Windows Vista, Windows 7, etc.). The test software automatically records data for each test sample during the test, which is fully automated. The software interface can make an operation parameter setting input, and configure the panel run test, including test types, samples, sample size, standard reference values, and the like, and saved in a later stage. Software programs for foam compression testers are intelligent. Once the test configuration menu is set, just press the "Start" button, the test will automatically run. The test results are displayed on the computer in real time, then follow the requirements (saved or printed). Application: • Soft polyurethane foam •car seat • Bicycle seat •Mattress •furniture • Seat Software function: • Data acquisition frequency adjustable • Displacement or load control • Test parameters are simultaneously displayed • Data displayed in real time graphics • Optional graphic display • Data output is an Excel form • Emergency stop • After the automatic test, select recirculation test • Calibration Instrument Sample Test Configuration Screen •Statistical Analysis • Print report • Compatible with Windows operating system • Programming based on ISO standards and ASTM standard test methods • Programming according to other test methods • Record each data record in the loop test Features: • Samples can be tiled in the ground • Easy to operate • Automatic software operation • Test various sizes samples • 934 ± 5 ​​square centimeter round head (Ø344mm, 13/2 ') • Compressed test heads all travel: 1,056mm • Maximum sample mattress height: 652 mm instruction: • Enter the system-closed loop system to reduce the error rate. • Pressure: 0 -2450n (250kg)) • Speed ​​(mm / minute): 0.05 to 500 mm / min • Speed ​​error rate: ± 0.2% • Return speed (mm / s): 500mm / min • Load measurement accuracy: ± 0.5% display value or ± 0.1% full range • Load automatic zeroing, load sensor automatic calibration • Safety function: Automatic emergency stop when testing overload Options: • Special pressure sensor customization • Personalized operation interface • Overhead: 8 Ø Reference applicable standard: • AS 2281 • AS 2282.8 • ASTM F1566 • ASTM D3574 - Test B • ISO 3386: 1984 • ISO 2439 • BS EN 1957: 2000 Electrical connections: • 220/240 Vac @ 50 hz or110 Vac @ 60 HZ (Can be made according to customer requirements) Dimensions: • H: 1,912mm • W: 700mm • D: 2,196mm Sample Graph Printout • Weight: 450kg