The drop-weight impact test, also known as the Gardner impact test, is a traditional method to evaluate the impact strength or toughness of materials. It is often used for materials with certain impact resistance. The test method is to place the sample on the hole of the specified diameter of the base plate, with a punch above the sample, raise a certain load from the inside of the tube to a predetermined height, and then release it to allow the punch to enter the sample. Record the height of the drop, the weight of the drop and the test result (broken/unbroken). Drop hammer impact tester Model: G0001 The drop hammer impact test, also known as the Gardner impact test, is to evaluate materials The traditional method of impact strength or toughness. It is often used to have a Materials with fixed impact resistance. The test method is to place the sample on the hole of the specified diameter of the base plate with a punch Located above the sample, a certain load is raised from the inside of the pipe to a predetermined height, Then release, so that the punch enters the specimen. Record the height of the drop and the weight of the drop And test results (broken/unbroken). Application: • Various plastic materials Features: • Weights: 0.9kg (2Lb), 1.8kg (4Lb) and 3.6kg (8Lb) • The unit of average destruction energy kg-cm (in-lb) is marked on the catheter • High durability support plate • Stainless steel impact head Guideline: • ASTMD5420 • ASTMD5628 • ASTMD3763 • ASTMD4226 • ISO 6603-1: 1985 Optional accessories: • Customized special weights • Customized special weight impact head • Replacement catheter Dimensions: • H: 1,400mm • W: 300mm • D: 400mm • Weight: 23kg