At the same time, it is also suitable for the detection of soft materials such as adhesives, adhesive tapes, self-adhesives, adhesive composites, composite films, plastic films, and paper. The product operating system is fully computer controlled: Before testing, we can set specific data according to our actual conditions to ensure the accuracy of the test results, including: test number, thickness, operator, temperature, laboratory temperature, residence time, humidity, Sealing pressure, sample width, cooling time, separation rate. H0005 Hot Tack Tester This product is specialized in the heat-adhesive and heat-seal performance of composite packaging materials Development and manufacturing of test requirements. It is also suitable for adhesives, adhesive tapes, Stickers, adhesive composite products, composite films, plastic films, paper, etc. Soft materials are tested for peeling and other items. End of product operating system Fully realized computer control: before the test, we can according to our actual Set specific data in the actual situation to ensure the accuracy of the test results, Including: test number, thickness, operator, temperature, laboratory temperature, Residence time, humidity, sealing pressure, sample width, cooling time, Separation rate. Once the test parameters are set by the operator, the sample is Put into the sample holder, before pressing the start, the hot tack tester will automatically Place the sample between the heating and sealing clamps to close the clamps with milliseconds For the predetermined time in seconds, quickly disassemble the sealed sample tape and start the peeling process. Features •Color touch screen • Cycle history page to view test progress •Printing thermal tack map: V-shaped sealing temperature of applied force •Safety protection and safe operation of switches • Automatically pause after 10 minutes of inactivity • Automatically record laboratory ambient temperature •Laboratory humidity records • Adjustable parameters through the touch screen •Manual/automatic operation •Product operation safety guarantee: professional operators or calibration personnel enter the password to enter the calibration menu • Adjustable start/end point •PID temperature control sealing jaw • Microsoft Windows CE operating system • Time/date memory Parameter settings: • Sealing temperature: room temperature—200°C—0.2°C; • Readability: 0.1°C • Sealing pressure: 115.0 kPa to 530.0 kPa •Dwell time: minimum 100ms to 32000ms–1ms •Peel test range: 50 pounds • Peel test speed (mm/S): 4 to 800 •Heat cover: 100×5mm flat PTFE coating •Electrical: 3-phase, 415V, AC 50HZ • Air source: 80 pounds, with a recommended minimum of 60 pounds. •Sample size: 15 or 25mm width is recommended, length: 250mm After the sample test is completed, the product test system will display a page prompt. The operator must enter the failure mode. The standard states that many different The failure mode occurs during the destruction of the strip, and the hot tack tester allows Operators are allowed to enter one of seven failure modes. If the operator is not satisfied, Then touch the repeat cycle button, the test will not record any results, The period and number of samples will remain unchanged. Executive standard: • ASTM F1921 • ASTM F2029 Optional functions and accessories: • RS232 output port • Inkjet Printers • Customized curling hot cover Voltage and air source: 220 V AC @ 60 HZ Recommended air source: 80psi Weight and size: length, width and height: 400mm× 1,000mm×1,400mm Weight: 100kg Features •Color touch screen • Cycle history page to view test progress •Printing thermal tack map: V-shaped sealing temperature of applied force •Safety protection and safe operation of switches • Automatically pause after 10 minutes of inactivity • Automatically record laboratory ambient temperature •Laboratory humidity records • Adjustable parameters through the touch screen •Manual/automatic operation •Product operation safety guarantee: professional operators or calibration personnel Enter the password to enter the calibration menu • Adjustable start/end point •PID temperature control sealing jaw • Microsoft Windows CE operating system • Time/date memory parameter settings: • Sealing temperature: room temperature—200°C—0.2°C; • Readability: 0.1°C • Sealing pressure: 115.0 kPa to 530.0 kPa •Dwell time: minimum 100ms to 32000ms–1ms •Peel test range: 50 pounds • Peel test speed (mm/S): 4 to 800 •Heat cover: 100×5mm flat PTFE coating •Electrical: 3-phase, 415V, AC 50HZ • Air source: 80 pounds, with a recommended minimum of 60 pounds. •Sample size: 15 or 25mm width is recommended, length: 250mm After the sample test is completed, the product test system will display a page prompt. The operator must enter the failure mode. The standard states that many different The failure mode occurs during the destruction process of the strip, the hot tack test The instrument allows the operator to enter one of seven failure modes. If the operator Not satisfied, and then touch the repeat cycle button, the test will not be recorded Any result, period and number of samples will remain unchanged. Executive standard: • ASTM F1921 • ASTM F2029 Optional functions and accessories: • RS232 output port • Inkjet Printers • Customized curling hot cover Voltage and gas source: 220 V AC @ 60 HZ Recommended air source: 80psi Weight and size: Length, width and height: 400mm× 1,000mm×1,400mm Weight: 100kg