Melt FlowIndex (MI), the full name of Melt Flow Index, or Melt Flow Index, is a numerical value indicating the fluidity of plastic materials during processing.
Melt FlowIndex (MI), the full name of Melt Flow Index, or Melt Flow Index, is a numerical value indicating the fluidity of plastic materials during processing. It is formulated by the American Standards Association according to the method used by DuPont to identify the characteristics of plastics. Melt Indexer Model: M0004 Melt FlowIndex (MI), full name melt flow index, Or melt flow index, which is a way to indicate the flow of plastic materials during processing The numerical value of sex. It is the American Measurement Standards Association according to DuPont Developed by the usual methods of identifying the characteristics of plastics. The specific operation process of the test is: the polymer (plastic) raw material to be tested Put it in a small groove, the end of the groove is connected with a thin tube, the diameter of the thin tube is 2.095mm, The tube length is 8mm. After heating to a certain temperature (usually 190 degrees), the raw materials The upper end uses a piston to apply a certain weight to squeeze downwards to measure the raw material The weight extruded in 10 minutes is the flow index of the plastic. The commonly used method of expression is: MI25g/10min, which means in 10 minutes The plastic is extruded 25 grams. Generally, the MI value of commonly used plastics is approximately between Between 1-25. The larger the MI, the smaller the viscosity of the plastic material and the smaller the molecule The smaller the weight, on the contrary, the greater the viscosity of the plastic and the greater the molecular weight. Application: • All kinds of plastics Features: Barrel: 50.8mm (outer diameter)/9.55mm (inner diameter), 162mm (length) Temperature: The temperature control range of the barrel is 100℃~300℃/±1℃ Die: Tungsten carbide material, 9.47mm (outer diameter)/2.096mm (inner diameter), 8mm (length) A die with an inner diameter of 1.181mm can also be selected according to BS 2782 method 1050. Guideline: • BS2782 • ASTMD1238: Procedure A • ISO 1133 Electrical connections: • 220/240 VAC @ 50 HZ or 110 VAC @ 60 HZ (Can be customized according to customer needs) Dimensions: • H: 480mm • W: 430mm • D: 270mm • Weight: 27kg