RV-300F series thermal deformation and Vicat softening point temperature tester: used to determine the thermal deformation temperature and Vicat softening point temperature of various plastics, rubbers and other thermoplastic materials. It is widely used in the production, scientific research and teaching of plastic materials and products. The thermal deformation and Vicat softening point temperature tester series are compact in structure, beautiful in appearance, stable in quality, and have the functions of discharging oil fume and odor pollution and cooling. They are cost-effective models. The MCU control system is used to automatically measure and control temperature and deformation, automatically obtain test results, and automatically store test data. Thermal deformation and Vicat softening point temperature tester are displayed in Chinese LCD. The same series also have RV-300FT (touch screen), RV-300FW (micro-control type), micro-control WINDOWS Chinese (English) interface, automatic temperature measurement and control Deformation, real-time drawing of test curves, automatic calculation of test results, storage of historical data, and print out test reports. Implementation Standards: The instrument meets the requirements of ISO75, ISO306, ASTM D648, ASMT D1525, GB1633, GB1634, GB8802 and other standards Technical Parameters: 1. Temperature control and measurement range: room temperature~300℃; 2. Heating rate: 120±10℃/h [(12±1)℃/6min] 50±5℃/h [(5±0.5)℃/6min] 3. Maximum temperature error: ±0.5℃ 4. Deformation measurement range: 0～10mm 5. Maximum deformation measurement error: ±0.01mm 6. Sample rack/test position: 6 racks, automatic lifting 7. Load rod, tray, indenter (indenter head), dial indicator measuring rod mass and: 71 g 8. Heating medium: methyl silicone oil or other medium specified in the standard (user-provided, note that the flash point of the medium must be higher than the maximum temperature of the test by more than 50 ℃). 9. Heating power: 3kW. 10. Cooling method: water cooling below 150℃, air cooling above 150℃ (cooling equipment users should prepare by themselves) 11. Power supply: 220V±10% 10A 50Hz. 12. Safety protection: With upper limit temperature setting, automatic alarm function, when the temperature reaches the upper limit, it will automatically stop heating. 13. Chinese LCD display: It can display the test temperature, set the upper limit temperature, and automatically record the test temperature. 14. It has an automatic oily fume removal system, which can effectively suppress the emission of oily fume and maintain a good air environment in the laboratory.